1. Press "TV" button and then press "Power" button. (The TV light should come on)

2. Press "CBL" button and then press "Power" button. (3 white lights should appear on the cable box)

3. Ensure BOTH TV & Cable are powered on

(Please be patient, TV/CABLE might take a few seconds to power on)

NOTE: DO NOT USE “SMART” REMOTЕ

NO SIGNAL MESSAGE ON TV SCREEN: If the TV screen shows "NO SIGNAL," press the TV button and then the lowest left button VIDEO SOURCE and a popup should appear on the screen with the following: TV, HDMI1, HDMI2, VIDE01, VIDEO2, Component. Using the up/down arrow around the SELECT button, navigate to the COMPONENT input. (if the popup disappears as you are reading the list, press VIDEO SOURCE again and it will show.)

CHANNEL GUIDE: Digital HD channels start at 1001.

1. Press "Power" button (use SMART REMOTE as pictured)

2. Use remote as desired for "smart TV"

NOTE: DO NOT USE CABLE REMOTE

NETFLIX, HULU, DISNEY+, etc:

If you'd like to watch Netlfix, Hulu, etc. (with your own account), please ensure you are using the "smart TV" option.

1. Ensure the output is set to "Smart TV" & use the SMART REMOTE only

2. Remember to log out of any apps used prior to check out

NOTE: DO NOT USE CABLE REMOTE

1. WIFI NETWORK should show mekROOM#

2. Enter the PASSWORD alohaEXT.#

Example: For unit# X100, look for NETWORK: mekX100 & enter PASSWORD: alohaXXX

The first Spectrum box (MODEM) has 2 lights that should be BLUE (power & online) & the second Spectrum Box (ROUTER) has a light at the bottom right corner that should be BLUE.

NETWORK: mek___________

PASSWORD: aloha___________